Quartzcolor IRIS 1 - 1250W x 1 CYCLORAMA SOFTLIGHT (USED)
IRIS Cyclorama luminaires are designed to evenly illuminate cycloramas up to 7 meters high with maximum illumination at performer head height of 2 meters. The IRIS series is the ideal solution for the tallest cycloramas providing smooth even illumination.
The specifically designed lamp house compartment of the IRIS series - IRIS 1, IRIS 2 vertical & horizontal, IRIS 3 and IRIS 4 - have become a real industry standard.
Suitable for TV studios, motion picture sound stages and theatrical applications.
Main Feature
- Single formed sheet steel housing assembled via electrical spot welding
- High quality Epoxy powder paint against corrosion
- Scratch resistant black non-reflective housing
- Designed for 625 W, 1000 W or 1250 W 189 mm linear tungsten halogen 3200 K lamps
- Superior ventilation system provides extended colour filter life
- Supplied with 28 mm spigot, wire mesh safety guard, colour frame and power cable
- Easy to service and maintain
- CE mark
Operational Data | |
Power consumption | 1250 W |
Supply voltage | 100 – 240 V |
Tilt adjustment | Pivot located at centre of gravity for excellent balance and positive locking |
Tilt recommended angle of use | Vertical to -45° |
Focus adjustment | Fixed beam |
Accessory fitting | Built-in accessory support frame fitting enabling an easy and secure vertical slide of wire mesh safety guard and gel frame. For extra safety, the accessories are held in place with a safety bond |
Colour frame | 400 mm x 305 mm (with safety mesh) |
Filter cut size diameter | 395 mm x 305 mm |
Lamp holder | R7s |
Lamp access | After removal of wire mesh safety access guard 3 mm x 3 mm |
Safety mesh | Compartment fitted with wire mesh safety guard 3 mm x 3 mm |
IP rating | IP 20 |
Max operating ambient temperature | 45° |
Optical Data | |
Reflector | Asymmetric multi-curve reflectors with special anodised coating for high-efficiency finish |
Mechanical Data | |
Finish | High-quality epoxy powder coating Special extra high-temperature treatment in critical areas External textured low gloss finish |
Lamp housing | Formed sheet steel lamp housing house compartment |
MO mounting | Manual U-shaped flat base stirrup with single lock off knob, with lateral assembly plates, 28 mm (1 1/8”) spigot |
PO mounting | Pole Operated U-shaped square base stirrup, pan & tilt clutch gear mechanism for manual override, with lateral assembly plates, 28 mm (1 1/8") spigot |
Electrical | |
MO version | 5 m bare ended cable (no switch) on each compartment, 3 x 1.5 mm² section cable Plugs and cables upon request |
PO version | 5 m bare ended cable (no switch) on each compartment, 3 x 1.5 mm² section cable Plugs and cables upon request |
Dimensions | |
Weight (head) | 8.5 kg manual version 8.5 kg pole op version |
Packed volume | 610 mm x 530 mm x 310 mm |